Windows cell troubleshooting from an abstract perspective isn’t much different than Linux cell troubleshooting. The main differences appear in the commands and tools you use, but the techniques and approaches are very similar.
Here’s a braindump of a some Windows commands you might find useful, especially from a remote
bosh ssh or
cf ssh terminal. All the commands below assume you’re running from a Powershell session unless otherwise stated. You can start powershell by typing
powershell from your SSH session’s CMD prompt.
Windows doesn’t have netcat (nc) to test IP and port connectivty, but it does have the
Test-NetConnection cmdlet built into powershell which does a similar job.
PS C:\> Test-NetConnection 18.104.22.168 -Port 53 ComputerName : 22.214.171.124 RemoteAddress : 126.96.36.199 RemotePort : 53 InterfaceAlias : Ethernet SourceAddress : 10.0.2.15 TcpTestSucceeded : True
Powershell has wget aliased to the
Invoke-WebRequest cmdlet. You can use wget to test an http endpoint or download a file.
wget https://api.example.com -UseBasicParsing
It’s important to provide the
-UseBasicParsing flag otherwise you’ll see a questionable error about some InternetExplorer setting that you can’t get to without a GUI.
If want to download a file, I highly recommend that you turn off the progress stream via
$ProgressPreference = 'SilentlyContinue' in powershell as it slows your download times by an order of magnitude.
PS C:\> $ProgressPreference = 'SilentlyContinue' PS C:\> wget https://example.com/somefile.msi -OutFile somefile.msi
Viewing event logs from Windows Server Core can be a bit challenging at first since there’s no Event Viewer (eventvwr). If you’ve enabled the Syslog configuration in the PASW tile you can view your event logs through the firehose, otherwise keep reading.
PS> Get-EventLog -LogName system -EntryType error Index Time EntryType Source InstanceID Message ----- ---- --------- ------ ---------- ------- 3623 Apr 02 15:10 Error Schannel 36874 An SSL 3.0 connection requ... 1852 Apr 02 11:18 Error Service Control M... 3221232503 The route_emitter_windows... PS C:\> Get-EventLog -logname system -index 1852 | Select -ExpandProperty Message The route_emitter_windows service terminated unexpectedly. It has done this 2 time(s). The following corrective action will be taken in 5000 milliseconds: Restart the service.
The bosh job logs are in the same directory structure as on Linux cells. You can cd into the job log directory and use
select-string to grep for specific text.
PS C:\> cd /var/vcap/sys/log/clam_av PS C:\> Select-String install.log -pattern error install.log:220:Property(S): ErrorDialog = ErrorDialog install.log:325:MSI (s) (70:9C) [11:14:17:649]: Windows Installer installed the product. Product Name: ClamAV. Product Version: 0.100.1. Product Language: 1033. Manufacturer: Cisco Systems, Inc. Installation success or error status: 0.
Search through all job logs at once:
PS C:\> cd /var/vcap/sys/log PS C:\> Get-ChildItem -Recurse | Select-String "error" -List | Select Path Path ---- C:\var\vcap\sys\log\clamav-windows\install.log C:\var\vcap\sys\log\enable_ssh\pre-start.stderr.log C:\var\vcap\sys\log\garden-windows\garden-windows\job-service-wrapper.out.log
Tail a job log using
cat with the
PS C:\> cat clamd.log -Wait -Tail 5 Tue Apr 2 11:18:49 2019 -> +++ Started at Tue Apr 2 11:18:49 2019 Tue Apr 2 11:18:49 2019 -> Received 0 file descriptor(s) from systemd. Tue Apr 2 11:18:49 2019 -> clamd daemon 0.100.1 (OS: win32, ARCH: x86_64, CPU: x86_64) Tue Apr 2 11:18:49 2019 -> Log file size limited to 1048576 bytes. Tue Apr 2 11:18:49 2019 -> Reading databases from C:\var\vcap\data\clamav-windows
There is currently no out of the box command line text editor built into Windows, however that doesn’t mean you can’t install a 3rd party one. A decent one that’s easy to install is Nano.
PS C:\> $ProgressPreference = 'SilentlyContinue' PS C:\> wget ` https://nano-editor.org/dist/win32-support/nano-git-0d9a7347243.exe ` -OutFile nano.exe PS C:\> .\nano C:\var\vcap\jobs\clamav-windows\clamd.conf
You may encounter network issues which will require you to run tcpdump, but unfortunatley there’s no builtin tcp dump in Windows. In these cases Windows has the ability to capture network traffic with
netsh trace. These traces are written to binary .etl files which can then be read by Microsoft Message Analyzer or by Powershell’s
To start a capture run the
netsh trace start command.
netsh trace start capture=yes tracefile="$env:TEMP\nettrace.etl"
Do your network operations you want to capture, then stop the trace
netsh trace stop
You can either open the trace file in Message Analyzer or using Powershell. Here’s how you do it in Powershell. Note that the
-Oldest flag is required otherwise you’ll get an error.
PS C:\> $l = Get-WinEvent -Path "$env:TEMP\nettrace.etl" -Oldest PS C:\> $l | Select-Object
Sometimes you may need to troubleshoot a running container or a sidecar container without using
cf ssh or with local Administrator privileges. You can use
winc exec similar to
docker exec from a running container’s host VM. This of course requires that you
bosh ssh into the host container’s VM first.
Assuming you’re logged into the host VM and have a powershell shell, find the container
Id by running
PS C:\> Get-ComputeProcess Id : 97cfaf3b-d385-4746-7a3d-af00 Type : Container Isolation : Process IsTemplate : False RuntimeId : 00000000-0000-0000-0000-000000000000 RuntimeTemplateId : RuntimeImagePath : Owner :
With the container Id in hand, use winc to start a powershell session on the container, for example:
PS C:\> C:\var\vcap\packages\winc\winc.exe exec 97cfaf3b-d385-4746-7a3d-af00 powershell
You can instead login as the vcap container user by adding
If you need to find the command line used to start a running process you can use Get-CimInstance. Here’s an example that gets all the running nginx processes command lines.
PS C:\> Get-CimInstance Win32_Process -Filter "name = 'nginx.exe'" | Select CommandLine | Out-String -Width 160 CommandLine ----------- C:\etc\cf-assets\envoy\nginx.exe -p C:\Users\ContainerAdministrator\AppData\Local\Temp\nginx007262991
Out-String so the command line isn’t truncated automatically at 80 chars.